Anycubic Kobra (2022) / Kobra Neo problems, fixes and parts
Problems the Anycubic Kobra (2022) / Kobra Neo is known for and how to fix them, plus the replacement parts that fit: hotends, extruder, build plates, other.
Check the name on the frame or rating label: these two have no number in the name, a 220 x 220 mm bed and a direct drive print head, and the original Kobra has a 4.3 inch touch screen.
The Kobra and the Kobra Neo use different print head assemblies, and the Kobra 2 family uses different nozzles again, so buy hotend parts by exact model.
A glass or other non-metal plate cannot be used with the stock leveling sensor, because it only detects metal.
- Known problem: Auto leveling fails or the nozzle presses into the bed. Make sure the PEI spring steel sheet is on the bed before homing or leveling.
- Known problem: Clogged print head. Push filament in by hand with the nozzle hot to check whether the nozzle or the extruder is at fault.
- Known problem: PTFE liner wears out with hot printing. Keep long prints at or below about 230 C where the filament allows it.
- Known problem: Extruder noise or slipping. Check that the spool turns freely.
- Known problem: MINTEMP E1 error, printer halted. Power off, unplug and let the print head cool to room temperature.
- Known problem: Weak part cooling curls small details. Slow the print down for small or overhanging parts.
- Kobra hotend (print head). Fits: Kobra (2022)
- Kobra Neo print head assembly (hotend module). Fits: Kobra Neo
- Kobra extruder. Fits: Kobra (2022)
- Proximity switch (leveling sensor). Fits: Kobra (2022), Kobra Neo
- PEI spring steel sheet. Fits: Kobra (2022), Kobra Neo
- X-axis and Y-axis pulleys (wheels). Fits: Kobra (2022), Kobra Neo