Anycubic Kobra 2 / Kobra 2 Pro problems, fixes and parts
Problems the Anycubic Kobra 2 / Kobra 2 Pro is known for and how to fix them, plus the replacement parts that fit: nozzles, hotends, heaters and sensors,…
Read the name on the frame label: the Kobra 2 Pro also runs a vibration test with its own sensor modules and reads a USB drive, while the plain Kobra 2 reads a TF memory card.
Kobra 2 series nozzles are their own part. Nozzles sold for the first Kobra, the Vyper or the Kobra 3 are listed separately and should not be assumed to fit.
Anycubic has separate belt, motherboard, power supply and heated bed guides for the Kobra 2 and the Kobra 2 Pro, so order those parts by exact model.
- Known problem: Leveling error from the calibration module. Press the metal button on the module by hand and check that it goes down and springs back.
- Known problem: Clogged print head. Push filament in by hand with the nozzle hot to see whether the nozzle or the extruder is the problem.
- Known problem: Extruder clicks or slips. Check that the spool turns freely and the filament has not slipped off the holder.
- Known problem: Wobbly bed or print head gives an uneven first layer. Power off and gently rock the bed and the print head by hand.
- Known problem: Noisy Z axis. Wipe the Z lead screws clean with a lint-free cloth.
- Kobra 2 series nozzle (brass, 0.4 mm). Fits: Kobra 2, Kobra 2 Pro, Kobra 2 Neo, Kobra 2 Plus, Kobra 2 Max
- Kobra 2 series hotend. Fits: Kobra 2, Kobra 2 Pro
- Print head Teflon (PTFE) tube. Fits: Kobra 2, Kobra 2 Pro
- Hotend silicone sock. Fits: Kobra 2, Kobra 2 Pro
- Print head cooling fan (hotend fan). Fits: Kobra 2, Kobra 2 Pro
- Model cooling fan (part cooling fan). Fits: Kobra 2, Kobra 2 Pro
- Hot end heating rod and temperature sensor wire. Fits: Kobra 2, Kobra 2 Pro
- Kobra 2 series extruder. Fits: Kobra 2, Kobra 2 Pro
- PEI spring steel plate. Fits: Kobra 2, Kobra 2 Pro