Anycubic Kobra 3 Combo problems, fixes and parts
Problems the Anycubic Kobra 3 Combo is known for and how to fix them, plus the replacement parts that fit: hotends, extruder, build plates, belts, fans,…
Anycubic says the standalone and Combo printers use the same accessories, so choose the Kobra 3 option when a parts page has no separate Combo choice.
Parts tagged for the ACE 2 Pro or Kobra 3 Max V2 Combo are not confirmed to fit the original ACE Pro or the Kobra 3 Combo, so check with Anycubic before buying them.
The Nozzle Wiper Assembly is a different part from the Heatbed Nozzle Wiper and does not list the Kobra 3.
- Known problem: Hotend keeps pressing into the bed when homing. Switch off at once if the nozzle is pressing hard on the bed.
- Known problem: Filament stuck in the print head and will not retract. Press the black collar on top of the hub and pull the Teflon tube up and out.
- Known problem: Purged plastic misses the purge wiper. Pull the scraper by hand and check that it springs back.
- Known problem: Noise from the ACE Pro buffer. Check whether the four buffer sliders sit level with each other.
- Anycubic Hotend for FDM 3D Printers (Kobra 3). Fits: Kobra 3, Kobra 3 Combo, Kobra 3 V2
- Anycubic Hotend Module for FDM 3D Printers (Printhead Assembly). Fits: Kobra 3, Kobra 3 Combo, Kobra 3 V2
- Anycubic Extruder for FDM 3D Printers (Kobra 3). Fits: Kobra 3, Kobra 3 Combo
- Anycubic Smooth Plate. Fits: Kobra 3, Kobra 3 Combo
- Anycubic Heated Bed for FDM 3D Printers (Kobra 3). Fits: Kobra 3, Kobra 3 Combo
- Anycubic Cooling Fan for FDM 3D Printers (Kobra 3). Fits: Kobra 3, Kobra 3 Combo
- Anycubic Belt Tensioner for FDM 3D Printers. Fits: Kobra 3, Kobra 3 V2
- Heatbed Nozzle Wiper. Fits: Kobra 3, Kobra 3 V2, Kobra 3 Max, Kobra S1
- ACE Pro buffer mechanism. Fits: ACE Pro
- ACE Pro drive wheel. Fits: ACE Pro
- ACE Pro idler pulley. Fits: ACE Pro