Anycubic Vyper problems, fixes and parts
Problems the Anycubic Vyper is known for and how to fix them, plus the replacement parts that fit: hotends, other.
The Vyper has a 245 x 245 mm bed, levels by touching the nozzle itself to the bed with no separate probe, and feeds filament through a tube from an extruder that sits apart from the hotend.
The Vyper takes long Volcano style nozzles. The shorter nozzles sold for the first Kobra and the Mega series are a different part.
A stiff or kinked filament tube can tug on the print head and upset the strain gauge, so route the new tube in a smooth curve.
- Known problem: Leveling fails or the nozzle scrapes the bed. With the nozzle cold, press up on the nozzle and look for a red light inside the print head.
- Known problem: Y-axis belt clip comes off. Turn the printer off.
- Known problem: Z-axis motor jams. Power off and reseat the Z motor cable, checking for crushed wires and bent pins.
- Known problem: Print stops midway with no error. Format the card as FAT32 or try a new card, and test with the official test file.
- Known problem: Filament tube burns at the hotend and causes clogs. Keep print temperatures around 235 to 240 C or lower.
- Known problem: False out-of-filament warning. Check that the filament passes all the way through the sensor.
- Vyper print head (hotend). Fits: Vyper
- Strain gauge (leveling sensor). Fits: Vyper
- Z-axis anti-backlash nut and lead screw. Fits: Vyper
- Filament runout sensor. Fits: Vyper