Artillery Sidewinder X1 / Sidewinder X2 problems, fixes and parts
Problems the Artillery Sidewinder X1 / Sidewinder X2 is known for and how to fix them, plus the replacement parts that fit: heaters and sensors.
The X2 has a blue plastic SIDEWINDER strip on the top beam and a built-in leveling probe on the print head; the X1 has a plain aluminum beam and no probe.
These printers take long Volcano nozzles, not the short MK8 or V6 nozzles used on many other printers.
The X1 and X2 differ in mainboard and cable connectors, so order boards and ribbon cables by exact model.
- Known problem: Ribbon cable connector works loose and can overheat. Power off and unplug the printer before touching any ribbon cable.
- Known problem: Mains bed cable has no strain relief. Power off and unplug the printer.
- Known problem: PTFE liner in the heat break wears out. Keep print temperatures at or below 240 C.
- Known problem: Plastic extruder lever cracks. Power off and look at the lever for cracks near the pivot and the spring.
- Known problem: Loose pulleys, couplers and belts from the factory. Power off and unplug the printer.
- Known problem: Cold spots on the glass bed. Let the bed soak at temperature for a few minutes before printing.
- Hotend thermistor (temperature sensor). Fits: Sidewinder X1, Sidewinder X2