Bambu Lab A1 problems, fixes and parts
Problems the Bambu Lab A1 is known for and how to fix them, plus the replacement parts that fit: hotends, heaters and sensors, extruder, build plates,…
The A1 and A1 mini share hotends, but their belts, wipers and build plates are different.
The AMS Hub cannot link AMS lite units, so it only helps if you move to AMS, AMS 2 Pro or AMS HT.
- Known problem: Heatbed cable recall (2024). Stop using the printer and unplug it if you do not know whether it has had the recall fix.
- Known problem: Clogged nozzle. Follow Bambu Lab's A1 unclogging guide and try pushing filament through by hand at printing temperature.
- Known problem: AMS lite reports a feed failure. Check that the spool turns freely and the filament is not tangled.
- Known problem: First layer too low because the hotend is loose. Let the hotend cool.
- Known problem: Loose belt warning. Follow the on-screen prompt.
- Bambu Hotend - A1/A2. Fits: A1 mini, A1, A2L
- Hotend Heating Assembly - A1 Series. Fits: A1, A1 mini
- Hardened Steel Extruder Gear Assembly - A1 Series. Fits: A1, A1 mini
- Hotend Cooling Fan - A1 Series. Fits: A1, A1 mini
- AMS lite feeder unit. Fits: AMS lite
- AMS lite filament hub. Fits: AMS lite
- Bambu Textured PEI Plate. Fits: A1, X1 Series, P1 Series
- PTFE Tubes. Fits: A1 with AMS lite
- X Belt - A1. Fits: A1
- Y Belt - A1. Fits: A1
- Heatbed Nozzle Wiper - A1. Fits: A1