Bambu Lab A1 mini problems, fixes and parts
Problems the Bambu Lab A1 mini is known for and how to fix them, plus the replacement parts that fit: hotends, heaters and sensors, extruder, build plates,…
Build plates come in three sizes, and the A1 mini only takes the 180 x 180 mm plate.
A1 and A1 mini belts and wipers look alike but are sold separately, so check the model in the part name.
- Known problem: Clogged nozzle. Follow Bambu Lab's A1 unclogging guide and try pushing filament through by hand at printing temperature.
- Known problem: AMS lite reports a feed failure. Check that the spool turns freely and the filament is not tangled.
- Known problem: First layer too low because the hotend is loose. Let the hotend cool.
- Known problem: Loose belt warning. Follow the on-screen prompt and Bambu Lab's maintenance guide for the axis named.
- Bambu Hotend - A1/A2. Fits: A1 mini, A1, A2L
- Hotend Heating Assembly - A1 Series. Fits: A1, A1 mini
- Hardened Steel Extruder Gear Assembly - A1 Series. Fits: A1, A1 mini
- Hotend Cooling Fan - A1 Series. Fits: A1, A1 mini
- AMS lite feeder unit. Fits: AMS lite
- AMS lite filament hub. Fits: AMS lite
- Bambu Textured PEI Plate. Fits: A1 mini
- PTFE Tubes. Fits: A1 mini with AMS lite
- X Belt - A1 mini. Fits: A1 mini
- Y Belt - A1 mini. Fits: A1 mini
- Heatbed Nozzle Wiper - A1 mini. Fits: A1 mini