Bambu Lab P1P problems, fixes and parts
Problems the Bambu Lab P1P is known for and how to fix them, plus the replacement parts that fit: hotends, extruder, build plates, nozzle wipers, other.
The P1P is the open-frame P1 printer with no side panels, door or top cover as shipped, while the P1S is the enclosed version of the same machine.
The complete hotend assembly is sold in separate X1 and P1 versions. Buy the P1 version for this printer.
A1 and A1 mini hotends look similar in photos but do not fit the P1P.
The stock stainless nozzle and steel extruder gears wear quickly with carbon fiber or glow filament, so buy the hardened nozzle and hardened extruder gear together.
- Known problem: Stock nozzle and extruder gear wear with abrasive filament. Stop printing carbon fiber, glass fiber and glow filament on the stock parts.
- Known problem: Dirty carbon rods cause drag and layer shifts. Power off the printer.
- Known problem: Noisy mainboard fan on early units. Listen at the back of the printer to confirm the noise is the mainboard fan.
- Known problem: Z axis bearing pushed out of place. Power off and check that nothing is trapped under the bed.
- Known problem: Hotend fan error. Power off and let the hotend cool.
- Known problem: AMS cannot pull filament back. Update the printer firmware first.
- Bambu Hotend - P1 Series. Fits: P1P, P1S
- Complete Hotend Assembly - P1P. Fits: P1P
- Hardened Steel Extruder Gear Assembly. Fits: P1P, P1S, X1
- Nozzle Wiper - X1/P1 Series. Fits: P1P, P1S, X1, X1 Carbon
- Replacement Filament Cutter. Fits: P1P, P1S, X1 Carbon
- Silicone Sock for Hotend. Fits: P1P, P1S, X1 Carbon
- Bambu Textured PEI Plate. Fits: P1P