Bambu Lab P1S problems, fixes and parts
Problems the Bambu Lab P1S is known for and how to fix them, plus the replacement parts that fit: hotends, heaters and sensors, extruder, build plates,…
The P1S ships with stainless steel gears and nozzle, so abrasive filament needs both the hardened gears and a hardened hotend.
The AMS lite does not work with the P1S, so buy AMS 2 Pro or AMS HT parts instead.
- Known problem: Stock nozzle and extruder gear wear with abrasive filament. Stop printing carbon fiber, glass fiber and glow filament on the stock parts.
- Known problem: PLA jams in the extruder when the chamber is hot. Let more heat out of the enclosure when printing PLA, for example by opening the door.
- Known problem: Dirty carbon rods cause drag and layer shifts. Power off the printer.
- Known problem: Z axis bearing pushed out of place. Power off and check that nothing is trapped under the bed.
- Known problem: AMS cannot pull filament back. Update the printer firmware first.
- Bambu Hotend - P1 Series. Fits: P1 Series
- Ceramic Heater & Thermistor 3 pcs - P1 Series. Fits: P1 Series
- Cooling Fan for Hotend - P1 Series. Fits: P1 Series
- XY timing belt. Fits: P1 Series
- Hardened Steel Extruder Gear Assembly. Fits: X1 Series, P1 Series
- Bambu Textured PEI Plate. Fits: X1 Series, P1 Series, A1
- Bambu Cool Plate SuperTack. Fits: X1 Series, P1 Series, A1, P2S, X2D
- PTFE Tubes. Fits: X1 Series, P1S
- Bambu Activated Carbon Air Filter. Fits: X1 Carbon, P1S
- Nozzle Wiper - X1/P1 Series. Fits: X1 Series, P1 Series
- AMS 2 Pro feeder unit. Fits: AMS 2 Pro
- AMS 2 Pro internal hub unit. Fits: AMS 2 Pro