Bambu Lab X1 Carbon problems, fixes and parts
Problems the Bambu Lab X1 Carbon is known for and how to fix them, plus the replacement parts that fit: hotends, heaters and sensors, extruder, build…
Several X1C parts do not fit the X1E even though the names look alike.
X1C and P1 complete hotend assemblies are different versions, so match the assembly to your printer.
- Known problem: Micro lidar errors. Restart the printer and run the calibration again.
- Known problem: Dirty carbon rods cause drag and layer shifts. Power off the printer.
- Known problem: PLA jams in the extruder when the chamber is hot. Let more heat out of the enclosure when printing PLA, for example by opening the door.
- Known problem: Noisy mainboard fan on early units. Listen at the back of the printer to confirm the noise is the mainboard fan.
- Known problem: AMS cannot pull filament back. Update the printer firmware first.
- Bambu Hotend - X1C. Fits: X1, X1 Carbon
- Ceramic Heater 3 pcs - X1C. Fits: X1, X1 Carbon
- Thermistor 3 pcs - X1C. Fits: X1, X1 Carbon
- Hardened Steel Extruder Unit - X1C. Fits: X1, X1 Carbon
- Cooling Fan for Hotend - X1C. Fits: X1, X1 Carbon
- XY timing belt. Fits: X1, X1 Carbon
- Hardened Steel Extruder Gear Assembly. Fits: X1 Series, P1 Series
- Bambu Textured PEI Plate. Fits: X1 Series, P1 Series, A1
- Bambu Cool Plate SuperTack. Fits: X1 Series, P1 Series, A1, P2S, X2D
- PTFE Tubes. Fits: X1 Series, P1S
- Bambu Activated Carbon Air Filter. Fits: X1 Carbon, P1S
- Nozzle Wiper - X1/P1 Series. Fits: X1 Series, P1 Series
- AMS 2 Pro feeder unit. Fits: AMS 2 Pro
- AMS 2 Pro internal hub unit. Fits: AMS 2 Pro