Creality Ender 3 / Ender 3 Pro problems, fixes and parts
Problems the Creality Ender 3 / Ender 3 Pro is known for and how to fix them, plus the replacement parts that fit: nozzles, hotends, extruder, build plates,…
Both have a single-colour screen with a rotary knob and no tool drawer or belt tensioner knobs, and the Pro adds a wider 40 x 40 mm bar under the bed and a flexible magnetic print surface.
Buying 12 V fans, heaters or hot ends. The Ender 3 is a 24 V printer, and parts made for the 12 V CR-10 are not suitable.
Flashing firmware without checking the mainboard version first. Creality lists separate firmware for each board version, and old V1.1.x boards need a bootloader before they will take new firmware.
Buying the Sprite Extruder SE-NEO for a plain Ender 3. Creality lists the SE-NEO for the Neo models and the Sprite Extruder SE for the Ender 3 and Pro.
- Known problem: Old firmware without thermal runaway protection. Treat an early printer that still has its original firmware as unprotected until you know otherwise.
- Known problem: Solder-tinned wire ends working loose in screw terminals. Power off and unplug the printer before you look inside.
- Known problem: Cracked plastic extruder lever. Power off and release the filament.
- Known problem: Bowden tube slips and leaves a gap in the hot end. Heat the hot end to printing temperature and remove the filament.
- Known problem: PTFE tube damaged by printing too hot. Keep the nozzle at or below 240 °C with the stock hot end.
- Known problem: Bed will not stay level. Re-level the bed at all four corners with a sheet of paper.
- Known problem: Filament scraps falling into the mainboard fan. Power off and unplug the printer.
- MK8 Nozzles Kit 24 PCS. Fits: Ender 3, Ender 3 Pro
- High-end Hardened Steel Nozzle Kit. Fits: Ender 3, Ender 3 Pro
- Metal Extruder Kit (Red). Fits: Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 Max, CR-10, CR-10S
- Sprite Extruder SE. Fits: Ender 3, Ender 3 Pro, Ender 3 V2, Ender 5, Ender 5 Pro, Ender 5 Plus, CR-10
- Assembled Extruder MK8 Hotend Kit 24V. Fits: Ender 3, Ender 3 Pro, Ender 3 V2
- 235 x 235 mm build surface. Fits: Ender 3 (textured sticker surface), Ender 3 Pro (flexible magnetic surface)
- Creality Silent Mainboard V4.2.7. Fits: Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 Max