Creality Ender 3 S1 / Ender 3 S1 Pro problems, fixes and parts
Problems the Creality Ender 3 S1 / Ender 3 S1 Pro is known for and how to fix them, plus the replacement parts that fit: nozzles, extruder, build plates.
Both carry the Sprite direct drive extruder on the print head, two Z screws and a CR Touch probe, and the S1 Pro adds a touch screen, an LED light bar and a PEI sheet where the S1 has a knob screen and a PC-coated sheet.
Buying Ender 3 or Ender 3 V2 extruder parts. Those are for Bowden extruders mounted on the frame, and the S1 uses the Sprite extruder on the print head.
Flashing firmware without checking the mainboard chip. S1 boards were made with two different chips and the firmware files are specific to each.
Running an S1 at S1 Pro temperatures. Creality rates the S1 at 260 °C and the S1 Pro at 300 °C.
- Known problem: Blank screen after flashing firmware for the wrong chip. Power off and unplug the printer.
- Known problem: CR Touch probe does not deploy and the nozzle hits the bed. Stop the print or switch the printer off straight away if the nozzle is pressing into the bed.
- Known problem: First layer too high or too low after auto leveling. Clean the nozzle tip and the build sheet.
- Known problem: Filament stuck in the heat break after unloading. Heat the nozzle to at least 185 °C and wait for the filament to soften.
- Known problem: Printer switches off when you push the head or bed by hand. Do not move the print head or bed quickly by hand while the printer is on.
- Known problem: Wobbly print head or bed from loose wheels. Power off the printer.
- 3D Printer Nozzle Kit 0.4mm / 5 PCS. Fits: Ender 3 S1, Ender 3 S1 Pro, Ender 3 S1 Plus
- Extrusion Kit for Ender-3 V3 SE/Ender-3 V3 KE/Ender-5 S1. Fits: Ender 3 S1
- Smooth PEI Build Plate 235*235mm. Fits: Ender 3 S1, Ender 3 S1 Pro