Creality Ender 3 V2 / Ender 3 V2 Neo problems, fixes and parts
Problems the Creality Ender 3 V2 / Ender 3 V2 Neo is known for and how to fix them, plus the replacement parts that fit: nozzles, hotends, extruder, build…
The V2 has a 4.3 inch colour screen with a knob, belt tensioner knobs, a tool drawer in the base and a glass bed, and the V2 Neo adds a CR Touch leveling probe, a flexible steel sheet and a metal extruder.
Mixing up the Sprite Extruder SE and SE-NEO. Creality lists the SE for the Ender 3 V2 and the SE-NEO for the V2 Neo.
Flashing firmware meant for a different board. Creality publishes separate V2 firmware for the V4.2.2 and V4.2.7 mainboards, so read the board first.
Buying a metal extruder for a V2 Neo. The Neo already ships with one.
- Known problem: Firmware built for the wrong chip on V4.2.2 boards. Before installing any third-party firmware, power off and unplug the printer.
- Known problem: Cracked plastic extruder lever. Power off and release the filament.
- Known problem: Bowden tube slips in its fittings. Watch the tube at both fittings while the printer retracts. It should not move.
- Known problem: Loose heater cartridge. Power off, unplug and let the hot end cool completely.
- Known problem: PTFE tube damaged by printing too hot. Keep the nozzle at or below 240 °C with the stock hot end.
- Known problem: Bed needs frequent re-leveling. Re-level all four corners with a sheet of paper.
- MK8 Nozzles Kit 24 PCS. Fits: Ender 3 V2, Ender 3 V2 Neo
- High-end Hardened Steel Nozzle Kit. Fits: Ender 3 V2
- Metal Extruder Kit (Red). Fits: Ender 3 V2
- Sprite Extruder SE / SE-NEO. Fits: Ender 3 V2 (Sprite Extruder SE), Ender 3 V2 Neo (Sprite Extruder SE-NEO)
- Assembled Extruder MK8 Hotend Kit 24V. Fits: Ender 3 V2
- 235 x 235 mm build surface. Fits: Ender 3 V2 (carborundum glass plate), Ender 3 V2 Neo (PC-coated spring steel sheet on a magnetic base)
- Creality Silent Mainboard V4.2.7. Fits: Ender 3 V2, Ender 3, Ender 3 Pro, Ender 3 Max
- CR Touch Auto Leveling Sensor Kit. Fits: Ender 3 V2, Ender 3 and Ender 3 Pro with a 32-bit board, Ender 5 and Ender 5 Pro with a 32-bit board