Creality Ender-3 V3 SE problems, fixes and parts
Problems the Creality Ender-3 V3 SE is known for and how to fix them, plus the replacement parts that fit: nozzles, hotends, extruder, build plates, belts,…
Owners often buy the Ender-3 V3 KE nozzle by mistake, but Creality's wiki lists the SE nozzle at 16.8 mm long and the KE nozzle at 23 mm.
The K1 series Extrusion Kit looks similar, but the SE needs the kit that names the Ender-3 V3 SE.
- Known problem: Restarts when heating or auto leveling. Switch off and unplug the printer.
- Known problem: First layer not sticking or nozzle scraping the plate. Clean the nozzle tip and the plate, paying attention to the lower left corner.
- Known problem: Thin prints stuck hard to the plate. Heat the bed to 80 to 90 °C so the print softens.
- Known problem: Extruder clicks during retraction. Open the retraction settings in your slicer.
- Known problem: Auto feed keeps running. Switch the printer off to stop the feed.
- Known problem: Rough layer lines from a loose print head or belt. Power off and rock the print head gently. If it wobbles, adjust the eccentric nut, the off-centre nut that sets how tightly the wheels grip.
- High-speed Nozzle Kit. Fits: Ender-3 V3 SE, Ender-7, Ender-5 S1
- Ender-3 V3 SE Print Head Kit. Fits: Ender-3 V3 SE
- Extrusion Kit for Ender-3 V3 SE/Ender-3 V3 KE/Ender-5 S1. Fits: Ender-3 V3 SE, Ender-3 V3 KE, Ender-5 S1, Ender-3 S1, Sermoon D3, Sermoon V2, Sermoon V1, Sermoon V1 Pro, CR-200B Pro
- Smooth PEI Build Plate 235*235mm. Fits: Ender-3 V3 SE, Ender-3 V3 KE, Ender-3 V3, K1, Ender-3 S1, Ender-3 S1 Pro, Ender-5 S1, CR-10 SE
- X-axis Belt Assembly_0.71M_Ender-3 V3 SE (SKU 2102012843). Fits: Ender-3 V3 SE, Ender-3 V3 KE
- Y-axis Belt Assembly_0.628M_Ender-3 V3 SE (SKU 2102012837). Fits: Ender-3 V3 SE
- 4010 Part Cooling Fan (SKU 3205010377). Fits: Ender-3 V3 SE, Ender-3 V3 KE