Creality K1 problems, fixes and parts
Problems the Creality K1 is known for and how to fix them, plus the replacement parts that fit: nozzles, hotends, extruder, build plates, tubes, belts,…
The K1 is the small enclosed K-series printer with a 220 x 220 x 250 mm build area, a plain copper nozzle and no camera as standard, while the K1C has a steel-tipped nozzle and a camera and the K1 Max is larger.
Ordering a nozzle without checking the hot end. Early K1 and K1 Max units have a separate hot end with set screws at the heat sink. Later units have the integrated quick-swap hot end with no set screws there. The Unicorn quick-swap nozzle only fits the integrated type.
Buying the K1 multi-colour upgrade kit for a printer with the early separate hot end. Creality says the kit only works with the integrated hot end.
Buying K1 Max plates or fans. The K1 Max uses a larger 315 x 310 mm plate and different fan part numbers.
- Known problem: Hot end clogs and feed jams on early units. Check the spool at the back for tangles first.
- Known problem: Filament jammed inside the extruder. Heat the nozzle to the filament's printing temperature.
- Known problem: Clog after printing ABS and switching filament. Remove the motor cover and the three screws holding the extruder.
- Known problem: Nozzle drags on the bed. Stop the print.
- Known problem: Uneven first layer after leveling. Clear the build plate and clean the nozzle tip.
- Known problem: Error 2564: nozzle did not heat as expected. Power off and unplug the printer and let the hot end cool.
- Known problem: Both temperatures read 0. Power off and unplug the printer.
- Known problem: Distorted edges at high speed. Let the bed cool and lift off the build plate so you can reach the platform screws.
- "Unicorn" Quick-Swap Nozzle Kit for K1C/Ender-3 V3/Ender-3 V3 Plus. Fits: K1 with the integrated quick-swap hot end, K1C, K1 SE
- Nozzle Kit M6 x d0.4 x H23 (SKU 4004020070). Fits: K1 with the original screw-in nozzle
- K1 Series Ceramic Heating Block Kit - Quick-swap Nozzle Kit. Fits: K1, K1 Max, K1C
- Extrusion Kit (Only for integrated hot-end). Fits: K1, K1 Max, K1C, Ender-3 V3, Ender-3 V3 Plus
- Smooth PEI Build Plate 235*235mm. Fits: K1, Ender 3 S1, Ender 3 S1 Pro, Ender-3 V3 SE, Ender-3 V3 KE, Ender-3 V3
- Teflon Tube Kit 2M. Fits: K1 series, by Creality's store listing
- Synchronous Belt Kit 1.8M (SKU 4001080072). Fits: K1, K1 Max
- 4020 Blower Fan (SKU 3205010383) and 3010 Axial Fan (SKU 3205010322). Fits: K1
- Filament Detector Kit (SKU 2102012333). Fits: K1