Creality K1 Max problems, fixes and parts
Problems the Creality K1 Max is known for and how to fix them, plus the replacement parts that fit: nozzles, hotends, extruder, build plates, tubes, fans,…
The K1 Max is the large K1, with a 300 x 300 x 300 mm build area, an AI LiDAR sensor on the print head and a carbon air filter, where the K1 and K1C print 220 x 220 x 250 mm.
Ordering a nozzle or heater without checking the hot end. Early K1 and K1 Max units have a separate hot end with set screws at the heat sink. Later units have the integrated quick-swap hot end with no set screws there. The original K1 Max heating block kit only fits the separate type, and the Unicorn nozzle only fits the integrated type.
Buying K1 or K1C build plates. The K1 Max plate is 315 x 310 mm and the smaller printers use 235 x 235 mm.
Buying the multi-colour upgrade kit for a printer with the early separate hot end. Creality says the kit only works with the integrated hot end.
- Known problem: Hot end clogs and feed jams on early units. Check the spool at the back for tangles first.
- Known problem: Error 2505 or the print head crashing during self-test. Stop using the printer so the head does not keep hitting the frame.
- Known problem: AI LiDAR errors. Wipe the LiDAR lens with a soft cloth and a little isopropyl alcohol.
- Known problem: Uneven first layer after leveling. Clear the build plate and clean the nozzle tip.
- Known problem: Ringing on walls. Check the left and right belt tensioners against the photos on Creality's page. A released tensioner has its spring extended and a locked one has its spring compressed.
- Known problem: Error 2111 when a print starts. Slice the file again in Creality's own slicer, version 4.3.5 or later, with K1 Max selected.
- "Unicorn" Quick-Swap Nozzle Kit for K1C/Ender-3 V3/Ender-3 V3 Plus. Fits: K1 Max with the integrated quick-swap hot end, K1C, K1 SE
- Nozzle Kit M6 x d0.4 x H23 (SKU 4004020070). Fits: K1 Max with the original screw-in nozzle
- K1 Series Ceramic Heating Block Kit - Quick-swap Nozzle Kit. Fits: K1, K1 Max, K1C
- Extrusion Kit (Only for integrated hot-end). Fits: K1, K1 Max, K1C, Ender-3 V3, Ender-3 V3 Plus
- K1 Max Smooth PEI Build Plate Kit 315*310mm. Fits: K1 Max
- Teflon Tube Kit 2M. Fits: K1 series, by Creality's store listing
- 4020 Blower Fan (SKU 4004110132) and 3010 Axial Fan (SKU 4004110133). Fits: K1 Max
- Activated Carbon Air Filter (SKU 4004010249). Fits: K1 Max
- K1 Max Ceramic Heating Block Kit (original version). Fits: Original K1 Max with the separate, non-integrated nozzle