Creality K2 Plus problems, fixes and parts
Problems the Creality K2 Plus is known for and how to fix them, plus the replacement parts that fit: nozzles, hotends, extruder, build plates, tubes, fans,…
K1 series Unicorn nozzles look similar but are a different part, so buy the kit that names the K2 Plus.
Creality's US heating block listing says 300°C while the printer is rated for 350°C, so confirm with Creality before relying on that kit for very hot filaments.
Creality's wiki lists no separate belt part for the K2 Plus and handles tension automatically, so run Input Shaping before buying belts.
- Known problem: Blob of plastic wrapped around the hot end. Unlock the motors, lower the bed and move the print head where you can reach it.
- Known problem: Waste chute blocked. Clear the pile from the chute.
- Known problem: Filament jammed in the extruder or buffer. Remove the three screws on the extruder and take off its shell, watching for the spring.
- Known problem: PTFE tube pops out of the extruder. If the connector no longer holds the tube, the extruder front cover has to be replaced. Creality's part number is 4001020081.
- Known problem: Glass door comes away from its hinge. Decide between gluing it yourself and asking Creality for a new door assembly.
- Known problem: Printer thinks filament is loaded when it is not. Pull the tube off the extruder and check that no filament scrap or debris is left in the path.
- "Unicorn" Quick-Swap Nozzle Kit (Compatible with K2/K2 Plus/Creality Hi). Fits: K2 Plus, K2, Creality Hi
- K2 Plus Ceramic Heating Block Kit. Fits: K2 Plus
- K2 Plus/K2 Pro/K2 Extruder Kit. Fits: K2 Plus, K2 Pro, K2
- K2 Plus/K2 Pro/K2 Extrusion Gear Kit. Fits: K2 Plus, K2 Pro, K2
- K2 Plus/K2 Pro/K2 Filament Cutter. Fits: K2 Plus, K2 Pro, K2
- K2 Plus PEI Frosted Build Plate. Fits: K2 Plus
- K2 Plus PTFE tube kit (SKU 4004200027). Fits: K2 Plus
- K2 Plus Heat break Fan (SKU 4004110136). Fits: K2 Plus
- K2 Plus Model Fan Assembly/Nozzle Fan (SKU 4004110137). Fits: K2 Plus
- K2/K2 Pro/K2 Plus Air Filter. Fits: K2 Plus, K2 Pro, K2
- K2 Plus nozzle wiper module kit (SKU 4004010266). Fits: K2 Plus
- K2 Plus Nozzle Wiper Adhesive Tape (SKU 4004010278). Fits: K2 Plus
- PTFE Tube Accessory Kit (SKU 4004200027). Fits: CFS
- Buffer Kit for CFS. Fits: CFS
- CFS Feed and Return Kit. Fits: CFS