Elegoo Centauri Carbon problems, fixes and parts
Problems the Elegoo Centauri Carbon is known for and how to fix them, plus the replacement parts that fit: hotends, extruder, build plates, nozzle wipers,…
Hotends for the Centauri Carbon and Centauri Carbon 2 use different thermistor types, so buy the kit named for the original Centauri Carbon.
The Composite Filter for Centauri Carbon 2 is not compatible with the original Centauri Carbon, and the Ceramic Heater for Centauri Series is listed only for the Centauri 2 family.
CANVAS units for the Centauri Carbon and Centauri Carbon 2 are different products and cannot be swapped.
- Known problem: Tool head front cover falls off during a print. Power off and unplug, then pull the cover open and unplug the fan lead.
- Known problem: Blob of plastic around the nozzle. Stop the print and let the hotend cool before touching anything.
- Known problem: Error 502: leveling sensor data collection error. Put the printer on a flat, steady surface with all four feet down, not on a table with wheels.
- Known problem: Layer shifting. Power off, unplug and let the hotend cool, then remove the front cover.
- Known problem: Extrusion problems with PLA in a closed chamber. Open the top cover or front door when printing PLA or other low-temperature filaments.
- Assembled Extruder Hotend Kit for Centauri Carbon. Fits: Centauri Carbon
- Dual Extruder Gears for Centauri Series. Fits: Centauri Carbon, Centauri Carbon 2, Centauri Carbon 2 Combo, Centauri 2, Centauri 2 Combo
- Dual-Sided Build Plate for Centauri Carbon. Fits: Centauri Carbon
- Spare Heatbed Nozzle Wiper. Fits: Centauri Carbon
- Elegoo CANVAS for Centauri Carbon. Fits: Centauri Carbon, all hardware revisions, including newer units without an AMS port