Elegoo Neptune 3 Pro problems, fixes and parts
Problems the Elegoo Neptune 3 Pro is known for and how to fix them, plus the replacement parts that fit: nozzles, heaters and sensors, extruder, build…
It has a 225 x 225 x 280 mm build area, plastic V-wheels, two Z lead screws and a removable touch screen; the Plus and Max are bigger versions, and the Neptune 4 Pro runs Klipper firmware on metal rails.
Neptune 4 nozzles are a custom shape and do not fit the Neptune 3 Pro, which takes MK8 nozzles.
Hardened steel nozzles need about 20 C more nozzle temperature than the stock brass one, or they clog.
Never home or level without the steel PEI sheet on the bed, because the sensor cannot see the bed without it.
- Known problem: First layer fails and leveling does not seem to work. Load the latest firmware from Elegoo, then reset the Z offset and level again.
- Known problem: Nozzle keeps moving down when homing. Switch off at once if the nozzle is pressing on the bed.
- Known problem: Nozzle temperature errors or a negative reading. Power off and unplug, then check the ribbon cable is long enough to reach every corner without pulling.
- Known problem: Nozzle clogs mid print. After printing hot materials, heat to 260 C and push filament through until it runs clean.
- Known problem: Printer will not turn on or the screen stays black. Unplug the printer and check the voltage switch matches your mains voltage.
- Known problem: Wobbly print head or bed from worn V-wheels. Power off the printer.
- 0.4MM Brass Nozzle Kit for Neptune 3 Pro/Max/Plus (MK8). Fits: Neptune 3 Pro, Neptune 3 Plus, Neptune 3 Max
- PTFE tube inside the hotend. Fits: Neptune 3 Pro, Neptune 3 Plus, Neptune 3 Max
- Extruder handle (gearbox lever). Fits: Neptune 3 Pro
- Extruder ribbon cable. Fits: Neptune 3 Pro
- Hotend thermistor (temperature sensor). Fits: Neptune 3 Pro
- X-axis synchronous belt. Fits: Neptune 3 Pro
- Plastic (POM) V-wheels. Fits: Neptune 3, Neptune 3 Pro, Neptune 3 Plus, Neptune 3 Max
- PEI magnetic spring steel sheet (235 x 235 mm). Fits: Neptune 3 Pro
- Proximity sensor (leveling sensor). Fits: Neptune 3 Pro