Prusa MINI+ problems, fixes and parts
Problems the Prusa MINI+ is known for and how to fix them, plus the replacement parts that fit: nozzles, hotends, heaters and sensors, extruder, build…
The MINI+ uses E3D V6 style nozzles, so Prusa's Nextruder nozzles for the MK4S and CORE One will not fit.
Heater cartridges and hotend PTFE tubes made for the MK3S+ look similar, but Prusa sells separate versions for the MINI+.
Print sheets for the MK4S are a different size, so buy one labeled for the MINI.
- Known problem: Clogs from a damaged PTFE tube in the hotend. Check the extruder idler screw. Its head should sit about flush with the plastic when no filament is loaded.
- Known problem: Filament will not unload. Check that the nozzle is at the right temperature for the loaded filament.
- Known problem: Uneven first layer from a skewed frame. Let the bed and nozzle cool and remove the steel sheet.
- Known problem: Bed probe gives flickering readings. Open Info, then Sensor info, and hold a metal object under the probe. The value should switch from 0 to 1.
- Nozzle 0.4 mm (E3D V6 compatible). Fits: Original Prusa MINI, Original Prusa MINI+
- Assembled hotend MINI/+. Fits: MINI, MINI+
- Hotend heater cartridge 24V 40W (MINI/+). Fits: MINI, MINI+
- Hotend thermistor (MINI/+). Fits: MINI, MINI+
- Extruder Drive Gear (Motor Pinion). Fits: MINI, MINI+
- Hotend PTFE tube (MINI/+). Fits: MINI, MINI+
- Extruder-Print head PTFE tube (MINI/+). Fits: MINI, MINI+
- Belt X-axis. Fits: MINI, MINI+
- Belt Y-axis. Fits: MINI, MINI+
- Print fan (MK3/S/+, MINI/+). Fits: MK3, MK3S, MK3S+, MINI, MINI+, MK3.5, MK3.5S
- Hotend fan MINI/+. Fits: MINI, MINI+
- MINI Satin Powder-coated Print Sheet. Fits: MINI, MINI+
- MINI Textured Powder-coated Print Sheet. Fits: MINI, MINI+