Prusa MK4S problems, fixes and parts
Problems the Prusa MK4S is known for and how to fix them, plus the replacement parts that fit: nozzles, hotends, heaters and sensors, build plates, belts,…
The part simply named Print fan fits the MK4, not the MK4S. MK4S owners need the part named Print fan blower.
The Spare Parts Bundle (for MK4) is listed as not compatible with the MK4S, even though the names look close.
Regular V6 nozzles do not fit the Nextruder unless you add Prusa's Nextruder-to-V6 adapter.
- Known problem: Nozzle cleaning failed error. Heat the nozzle to 250 °C for a few minutes and clean it with a small brass brush, keeping the brush away from the wires.
- Known problem: Under-extrusion from a nozzle that is not fully seated. Turn the printer off and let it cool fully.
- Known problem: Stuck filament detected pauses. Press unload, let the printer unload, then load the filament again to resume.
- Known problem: High-flow nozzle is not recommended with the MMU3. Fit a standard Prusa Nozzle brass before using the MMU3.
- Known problem: Plastic blob around the hotend. Heat the nozzle to about 250 °C for PLA or 280 °C for PETG or ABS and hold it there for at least 5 minutes.
- Prusa Nozzle brass CHT. Fits: MK4, XL, MK3.9, MK4S, MK3.9S, CORE One/+, CORE One L, XL+, CORE One+ (Gen 2), CORE One L+
- Prusa Nozzle brass. Fits: MK4, XL, MK3.9, MK4S, MK3.9S, CORE One/+, CORE One L, XL+, CORE One+ (Gen 2), CORE One L+
- Prusa Nozzle ObXidian. Fits: MK4, XL, MK3.9, MK4S, MK3.9S, CORE One/+, CORE One L, XL+, CORE One+ (Gen 2), CORE One L+
- Nextruder Hotend brass High Flow - 0.40 mm. Fits: MK4, XL, MK3.9, MK4S, MK3.9S, CORE One/+, CORE One L, XL+, CORE One+ (Gen 2), CORE One L+
- Heater 40 W - 120 mm. Fits: MK4, XL, MK3.9, MK4S, MK3.9S, CORE One/+, CORE One L, XL+
- Heatsink Thermistor NTC 100k - 90 mm. Fits: MK4, MK3.9, MK4S, MK3.9S, CORE One/+, CORE One L
- Print fan blower. Fits: MK4S, MK3.9S, CORE One/+, CORE One L, INDX (C1), INDX (C1L)
- Hotend fan MK4/3.9/XL. Fits: MK4, XL, MK3.9, MK4S, MK3.9S, CORE One/+, CORE One L, XL+
- Timing belt 2GT X-axis. Fits: MK2, MK2S, MK2.5, MK2.5S, MK3, MK3S, MK3S+, MK3.5, MK3.5S, MK3.9, MK3.9S, MK4, MK4S
- Timing belt 2GT Y-axis. Fits: MK2, MK2S, MK2.5, MK2.5S, MK3, MK3S, MK3S+, MK3.5, MK3.5S, MK3.9, MK3.9S, MK4, MK4S
- Satin Powder-coated Print Sheet. Fits: MK2.5, MK2.5S, MK3, MK3S, MK3S+, MK3.5, MK3.5S, MK3.9, MK3.9S, MK4, MK4S, CORE One/+, CORE One+ (Gen 2)
- PTFE 4x2.5x360. Fits: MMU3