Qidi Q1 Pro problems, fixes and parts
Problems the Qidi Q1 Pro is known for and how to fix them, plus the replacement parts that fit: nozzles, hotends, extruder, build plates.
QIDI's bimetal nozzles for the Q1 Pro only fit X-series printers that have the upgraded V2.5 hot end.
Parts for the newer Q2 are separate listings, so do not assume they fit the Q1 Pro.
QIDI's newer QIDI Box multi-color unit does not support the Q1 Pro.
- Known problem: PLA and PETG jam when the chamber is closed. For PLA, PETG and TPU, open the front door or take the top cover off while printing.
- Known problem: Probe samples exceed tolerance, probe failed. Lift the steel plate off and wipe the bed and the underside of the plate clean.
- Known problem: Thermocouple ADC out of range shutdown. Turn the printer off, unplug it and let the hot end cool.
- Known problem: Lost communication with MCU MKS_THR. Turn the printer off and unplug it.
- Known problem: Heater extruder not heating at expected rate. Turn the printer off, unplug it and let the hot end cool.
- Known problem: Bed is tilted and needs platform calibration. Check the steel plate is seated and nothing is lying on the bottom of the printer.
- Q1-Pro/X-Max 3/X-Plus 3/X-Smart 3 Bimetal Nozzles (2pcs). Fits: Q1 Pro hot end, X-Max 3, X-Plus 3 and X-Smart 3 only with the upgraded V2.5 hot end
- Q1-Pro, X-Max 3 & X Series Tungsten Carbide Nozzle. Fits: Q1 Pro, X-Max 3, X-Plus 3
- Q1 Pro Bimetal Hot End. Fits: Q1 Pro
- Hardened Steel Dual-Gear Extruder. Fits: Q1 Pro
- Dual-sided PEI Plate for Q1-Pro. Fits: Q1 Pro
- Q1-Pro Smooth Plate. Fits: Q1 Pro