Qidi Q2 problems, fixes and parts
Problems the Qidi Q2 is known for and how to fix them, plus the replacement parts that fit: nozzles, hotends, extruder, build plates, nozzle wipers,…
Q2 nozzles look like Plus4 nozzles, but QIDI strongly advises against swapping them because the length is different.
The Q2 Bimetal Hot End is not the same part as the Plus4 or Max4 hot end.
The Nozzle Wiper and the Wiper Silicone Case are separate items, so check which one you need.
- Known problem: Cooling fan speed error QDE_002_001. Turn the printer off.
- Known problem: Leveling or probe error because the bed rubs the Z-axis brackets. Home the printer and watch whether the platform touches the Z-axis fixtures on either side as it rises.
- Known problem: Bed too tilted for auto leveling. Start manual platform calibration from the screen.
- Known problem: Usable build area is smaller than advertised. Move or rotate the model so it avoids the front-left corner.
- Q2 Bimetal Nozzles (2pcs). Fits: Q2, Q2C, Plus 5
- Q2 Tungsten Carbide Bimetal Nozzle. Fits: Q2, Q2C, Plus 5
- Q2 Bimetal Hot End. Fits: Q2, Q2C
- Q2 Extruder. Fits: Q2, Q2C
- Q2 Dual-sided PEI Plate. Fits: Q2, Q2C
- Q2 Dual-Sided Smooth PEI Build Plate. Fits: Q2, Q2C
- Nozzle Wiper. Fits: Q2, Q2C
- Q2 Hotend Silicone Sock Protector (5pcs). Fits: Q2, Q2C
- PTFE Tube 1600mm x5. Fits: QIDI Box