Qidi X-Max 3 problems, fixes and parts
Problems the Qidi X-Max 3 is known for and how to fix them, plus the replacement parts that fit: nozzles, hotends, build plates, other.
The X-Max 3 is the largest model of Qidi's 3 series with a 325 x 325 x 315 mm build area, while the X-Plus 3 looks the same but is smaller at 280 x 280 x 270 mm.
Buying an X-Plus 3 plate. The X-Max 3 bed is larger, so the plates do not swap.
Fitting a generic nozzle of a different length. Qidi says the nozzle is a custom size, and the wrong length makes the bed hit the nozzle.
Buying bi-metal or tungsten carbide nozzles for the original hot end. Qidi says those only fit the V2.5 hot end.
- Known problem: PLA and PETG jam when the chamber is closed. For PLA, PETG and TPU, open the front door or take the top cover off while printing.
- Known problem: Lost communication error from the print head cable. Turn the printer off and unplug it.
- Known problem: Hot end heating error. Turn the printer off, unplug it and let the hot end cool.
- Known problem: Loud bearing noise from the motion system. Turn the printer off.
- Known problem: Corners lift on large nylon and carbon fiber prints. Close the door and fit the top cover so the chamber stays warm.
- Known problem: Errors or a dead system after updating Klipper yourself. Do not update Klipper or the system from the Fluidd page.
- QIDI Tech X-Max 3/X-Plus 3/X-Smart3 hot end V2.5. Fits: QIDI X-Plus 3, QIDI X-Max 3, QIDI X-Smart 3
- QIDI nozzle for X-Smart 3 / X-Plus 3 / X-Max 3 (plated copper or hardened steel). Fits: QIDI X-Plus 3, QIDI X-Max 3, QIDI X-Smart 3
- QIDI X-Max 3 Smooth Plate. Fits: QIDI X-Max 3
- Type-C USB cable (print head cable). Fits: QIDI X-Plus 3, QIDI X-Max 3
- PCB of the printing head (adapter board). Fits: QIDI X-Plus 3, QIDI X-Max 3
- EMMC (storage module on the mainboard). Fits: QIDI X-Plus 3, QIDI X-Max 3