Sovol SV06 problems, fixes and parts
Problems the Sovol SV06 is known for and how to fix them, plus the replacement parts that fit: nozzles, hotends, extruder, fans, other.
The original SV06 has a 220 x 220 mm bed, a small knob screen and smooth 8 mm steel rods on every axis, while the SV06 Plus has a much larger bed (its sheet is 320 x 310 mm) and the SV06 ACE is a newer, different machine with its own parts.
Buying the long high flow nozzles made for the SV06 Plus and SV07. The original SV06 takes ordinary MK8 nozzles.
Buying a glass, G10 or other non-metal build plate. The leveling probe only senses steel, so the nozzle can crash into a plate it cannot see.
Ordering SV06 Plus or SV06 ACE parts by mistake. The beds, rods, bearings and hotends are different sizes.
- Known problem: Bed heating failed or thermal runaway error. Turn the printer off and unplug it.
- Known problem: Heat creep clogs with PLA. Set retraction to about 0.5 to 0.8 mm in your slicer.
- Known problem: Loose extruder gear set screw. Remove the filament.
- Known problem: Dry, noisy linear bearings. Turn the printer off.
- Known problem: Crashing or grinding when homing. Check the X and Y belts. They should have no slack but should not be guitar-string tight.
- Known problem: Bed will not level or the mesh looks tilted. Tighten the four screws that hold the top beam of the frame, and check that the beam is not tilted.
- Known problem: Nozzle sits crooked (bent heat break). Look at the nozzle from the front and the side to see whether it hangs straight.
- Known problem: Z axis binds or shifts at the same height. Turn the printer off.
- MK8 nozzle (sold by Sovol as Sovol MK8 Extruder Nozzles). Fits: Sovol SV06
- Sovol SV06 All Metal Hotend Kit. Fits: Sovol SV06
- Sovol Copper+Titanium Alloy Bi-metal Heat Break. Fits: Sovol SV06, Sovol SV06 Plus, Sovol SV07, Sovol SV07 Plus
- Sovol 3D Printer Hotend Silicone Sock. Fits: Sovol SV06, Sovol SV06 Plus, Sovol SV07
- Sovol SV06 Original All Metal Planetary Direct Drive Extruder. Fits: Sovol SV06
- 24V 4010 fan (hotend fan and part cooling fan). Fits: Sovol SV06
- Sovol SV06 Inductive Proximity Sensor Switch for Z Probe Auto Bed Leveling. Fits: Sovol SV06