Fix the print that's going wrong
Step-by-step fixes for common 3D printing problems such as stringing, warping and first layers that won't stick.
- My first print: a checklist
- Stringing and oozing
- Warping and lifting corners
- First layer won't stick
- Elephant's foot (flared first layers)
- Layer shifting
- Under-extrusion and gaps
- Over-extrusion, blobs, and rough walls
- Clogged nozzle
- Heat creep (jams partway through long prints)
- Z-banding and inconsistent layers
- Ghosting, ringing, and echo patterns
- Spaghetti (print failed and came loose)
- Wet filament (popping, bubbles, rough surface)
- Bridging and overhang sag
- Layers splitting or cracking
- Zits, blobs, and visible seams
- Nozzle scraping or dragging across the print
- Extruder clicking or skipping
- Inconsistent first layer across the bed
- Supports are hard to remove or scar the part
- Holes too small or parts don't fit
- TPU jamming or not feeding
- PETG stuck to the bed or ripped the surface
- Rough or bumpy top surfaces
- Holes and bumps on top surfaces (pillowing)
- Drooping or curling overhangs
- Print stuck to the bed and how to remove it safely
- Multi-color unit won't load, cut or change colors cleanly
- Tangled spool, snagged filament or running out mid-print
- How to calibrate flow (extrusion multiplier)
- How to find a filament's best temperature with a temperature tower
- How to tune pressure advance for sharp corners