Ghosting, ringing, and echo patterns
Faint echoes of sharp edges, holes or text repeat across flat walls just after a corner. The printer shakes for a moment after each quick change of direction, and that shake gets printed into the wall.
Fixes, in the order to try them:
- Run input shaping calibration if your printer or firmware supports it, which measures the vibration and cancels it out.
- Lower acceleration, especially for outer walls, and reduce outer wall speed.
- Tighten the belts and frame bolts, and check that the print head doesn't rattle.
- Put the printer on a solid, heavy surface instead of a wobbly desk.
- Try a heavy paving slab or dense board under the printer.
- Test rubber feet carefully, since soft feet cut noise but can make ringing worse on fast printers.