TPU jamming or not feeding
Flexible filament bunches up, tangles or stops feeding, and the print comes out gappy or stops. TPU is soft like a rubber band, so it bends and buckles anywhere it has room, especially when pushed fast.
Fixes, in the order to try them:
- Print slowly, starting at 15 to 30 mm/s, or use the slicer's TPU preset, which limits how fast plastic is pushed.
- Set retraction to 0 to 1 mm with a slow retraction speed, or turn it off.
- Loosen the extruder idler a little so it grips the filament without flattening it.
- Feed TPU from an external spool holder instead of an automatic multi-spool feeder, unless your printer's maker says it's supported.
- Use a direct-drive extruder with a tight filament path; on Bowden printers, stick to 95A or harder and print very slowly.
- Dry the TPU at 50 to 55°C for 4 to 8 hours before printing.
- Let the spool unwind easily, for example on a holder with bearings.